BREATHER PLUGS

Breather plug with double valve tilt-function
Breather cap and suction with double valve constructed of aluminium alloy. Supplied with calibration breather from 0,07 to 0,15 bar and the inlet from 0,02 to 0,05 bar. Designed with a tilt function for prevent leakage of liquids. The dual valve allows the cap both the entrance and the exit pressure. Supplied complete with O-Ring. Particularly suitable for Tanks, portable Tanks, Generators and hydraulic lifting equipment. Available with gas thread 1-1/2” and 2” *without protection only for thread 2” gas

 

Filling plug with breather.
Threaded plug with knurled round head for hand-tightening. Hole for venting internal pressure. For application only on upper part of the crankcase away from moving parts. For applications requiring extra-tight sealing, type TSFT/N is recommended.
Available with gas thread from 1/8 to 2 and metric thread from 10x1 to 33x2.

 

Filling plug with breather.
Hole for venting internal pressure. For application only on upper part of the crankcase away from moving parts. For applications requiring extra-tight sealing, type TSFT/N is recommended.
Available with gas thread from 1/8 to 2 and metric thread from 10x1 to 60x4.

 

Filling plug with breather and milled head.
Hole for venting internal pressure. The milled head produces a crown with greater adherence area to the crankcase. For application only on upper part of the crankcase away from moving parts. For applications requiring extra-tight sealing, type TSFT/N is recommended.
Available with gas thread from 1/8 to 1 and metric thread from 10x1 to 22x1,5.

 

Filling plug and breather.
Threaded plug with hex head and with hole and a spherical bronze filter which vent internal pressure and keep out foreign bodies during the intake stroke. The built-in filter has a filtration degree of 40 microns. The TCFS is especially suitable in dusty environments and with very small encumbrance.
Available with gas thread from 1/4 to 1 and metric thread from 14x1,5 to 22x1,5.

 

Filling plug and breather.
Threaded plug with knurled round head for hand-tightening. The hole and a spherical bronze filter vent internal pressure and keep out foreign bodies during the intake stroke. The built-in filter has a filtration degree of 40 microns. The TCSF/Z is therefore especially suitable in dusty environments and is recommended for applications on Hydraulic Units.
Available with gas thread from 1/4 to 2 and metric thread from 14x1,5 to 33x2.

 

Breather plug.
Breather plug with O-ring and external valve calibrated from 0,10 to 0,15 bar.It opens at intervals and vents internal pressure. The valve has the double function of keeping out foreign bodies and holding in the fluid when the machine is turned upside down for shipping. It is especially recommended for Differentials, Transmissions and small Speed Reducers.
Available with gas thread from 1/8 to 1 and metric thread from 10x1 to 22x1,5.

 

Breather plug.
Oil filling and breather plug with galvanized-steel cover. Large internal chamber with O-ring especially designed for Agricultural and Earth- moving Machines, to be applied wherever there is strong sloshing of the fluids.
Available with gas thread from 1/8 to 1 and metric thread from 10x1 to 22x1,5.

 

Oil filling plug with breather.
A galvanized-steel cover and a spherical bronze filter vent internal pressure and keep out foreign bodies during the intake stroke. The built-in filter has a filtration degree of 40 microns. The TSF is therefore especially suitable in dusty environments and is recommended for applications on Hydraulic Units and Cylinders.
Available with gas thread from 1/4 to 2 and metric thread from 14x1,5 to 60x4.

 

Oil filling plug with breather.
A galvanized-steel cover and a spherical bronze filter vent internal pressure and keep out foreign bodies during the intake stroke. The built-in filter has a filtration degree of 40 microns. The TSFA is therefore especially suitable in dusty environments and is recommended for applications in the motorfield.
Available with gas thread from 1/8 to 1 and metric thread from 10x1 to 30x1,5.

 

Oil filling plug and breather.
Large chamber with labyrinth and perpendicular cut protected by a galvanized-steel cover. The pressure created by moving parts within the gearbox is vented through the labyrinth without oil spattering, even though the plug is mounted vertically to the parts. Particularly suitable for mounting on Reduction Gears, Geared Motors, Speed Variators and Gearshift Boxes.
Available with gas thread from 1/4 to 2 and metric thread from 14x1,5 to 60x4.

 

Breather plug with valve.
Breather plug with galvanized-steel cover and specially-designed internal valve, calibrated from 0,05 to 0,10 bar, which opens at intervals to vent internal pressure created by fluid turbulence. Besides keeping out foreign bodies, it lets overturning during shipment without fluid leaking. It is especially recommended for applications on Speed-shift Gears, Agricultural over-Gears and Speed-Reduction Gearboxes.
Available with gas thread from 1/8 to 1 and metric thread from 10x1 to 33x2.

 

Extension for oil with breather.
Made of aluminium alloy, same thread for both internal and external side, with large chamber with labyrinth. Particularly suitable for Agricultural, Earth Moving and Building Machines.
Available with gas thread from 1/4 to 1 and metric thread from 14x1,5 to 22x1,5.

 

Breather plug with double valve.
Breather plug with double valve made of hardened and tempered light alloy. It is provided with standard 0,10 bar calibration, which can be adjusted by the operator depending on the intended use. The double valve ensures venting of internal pressure and inlet of air when the flow medium level decreases thus hindering cavitation on delivery. Particularly suitable for Tanks, Oil-hydraulic Circuits and Hydraulically Operated Lifting Machines.
Available with gas thread from 1/4 to 1 and metric thread from 12x1,5 to 33x2.